Table of Contents
Advertisement
14. Setting the interval and number of voice messages
The DR-2X/DR-2XE has a message function that automatically transmits the recorded message on the
downlink frequency at specified intervals and number of times.
Setting the transmission interval of the message:
1 Touch [ A SETUP ] or [ B SETUP ] to display the frequency set up
screen, then touch [ F ] on the bottom of the screen.
2 Touch [ TIMER ] .
3 Touch [ MESSAGE ] twice.
4 Touching [ PLAY INTERVAL ] switches the transmission interval as
follows, then select the desired number of announcements.
à 0.5 hour à 1 hour à 2 hour à 3 hour à
The default setting is "1 hour".
5 Touch [ BACK ] 4 times.
The screen returns to the operation mode screen.
Setting the number of message transmissions:
1 Touch [ A SETUP ] or [ B SETUP ] to display the frequency set up
screen, then touch [ F ] on the bottom of the screen.
2 Touch [ TIMER ] .
3 Touch [ MESSAGE ] .
4 Touch [ PLAT TIMES ] .
5 Touching [ PLAY TIMES ] switches the transmission play time as
follows:
à 1time à 2times à 3times à 5times à 10times à 20times à
The default setting is 5 times.
6 Touch [ BACK ] 4 times.
The screen returns to the operation mode screen.
DR-2X / DR-2XE Operating Manual
S E T U P R X x . x x T X . x
8
4
D G - I D
R - O FF
T - O F F
TIMER
TOT
>
SQL
>
MESSAGE
>
BACK
BACK
MESSAGE
PLAY INTERVAL
1hour
PLAY TIMES
5times
BACK
BACK
S E T U P R X x . x x T X . x
8
4
D G - I D
R - O FF
T - O F F
TIMER
TOT
>
SQL
>
MESSAGE
>
BACK
BACK
MESSAGE
PLAY INTERVAL
1hour
PLAY TIMES
5times
BACK
BACK
31
Advertisement
Table of Contents
