Audio Board - HP Pavilion DV6110 Maintenance And Service Manual

Audio board

Description
For use in full-featured models (includes audio connectors, audio board cable, and infrared lens)
For use in defeatured models (includes audio connectors, audio board cable, and infrared lens)
Before removing the audio board, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Optical drive (see
b.
Switch cover (see
c.
Keyboard (see
d.
Speaker assembly (see
e.
Display assembly (see
f.
Top cover (see
g.
System board (see
h.
Remove the audio board:
Remove the two Phillips PM2.5×4.0 screws (1) that secure the audio board to the computer.
1.
Release the audio board (2) by sliding it back to disengage the audio connectors from the openings
2.
in the base enclosure.
Battery on page 46).
Hard drive on page 51)
Optical drive on page
Switch cover on page
Keyboard on page 65)
Speaker assembly on page
Display assembly on page
Top cover on page 74)
System board on page
59)
61)
63)
68)
82)
Component replacement procedures
Spare part number
446523-001
449967-001
85