Audio Board - HP Pavilion x360 Maintenance And Service Manual

3. Lift the left side of the fan up about 30°, and then pull the fan out from under the heat sink to remove it
(3).
Reverse this procedure to install the fan.

Audio board

To remove the audio board, use this procedure and illustration.
Table 5-9 Audio board description and part number
Description
Audio board for use in FF (plastic top cover) models
Audio board for use in FF+ (aluminum top cover) models
Audio board cable for use in models without WWAN
Audio board cable for use in models with WWAN
Before removing the audio board, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the audio board:
1. Disconnect the audio board cable from the audio board (1).
2. Remove the Phillips M2.0 × 3.0 screw (2) that secures the board to the computer.
48 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page 34).
34).
Battery on page 35).
Spare part number
N09450-001
N20632-001
N09462-001
N09463-001