Power Button Board - HP Pavilion DV6110 Maintenance And Service Manual

Power button board

Description
Power button board (includes power button board cable)
Before removing the power button board, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the switch cover (see
5.
Remove the keyboard (see
6.
Remove the power button board:
Remove the Phillips PM2.0×3.0 screw (1) that secures the power button board to the fan/heat sink
1.
assembly.
Remove the power button board (2) from the switch cover.
2.
Remove the power button board.
3.
Reverse this procedure to install the power button board.
64 Chapter 4 Removal and replacement procedures
Battery on page 46).
Switch cover on page
Keyboard on page 65).
61).
Spare part number
431437-001