Restoring Default Settings In The Setup Utility - HP Pavilion DV6110 Maintenance And Service Manual

Restoring default settings in the Setup Utility

The following procedure explains how to restore the Setup Utility default settings. If the Setup Utility is not
already running, begin at step 1. If the Setup Utility is already running, begin at step 2.
To start the Setup Utility, turn on or restart the computer, and then press
1.
enter setup" is displayed in the lower-left corner of the screen.
Select Exit > Load Setup Defaults, and then press enter.
2.
When the Setup Confirmation is displayed, press
3.
To set your preferences and exit the Setup Utility, press f10, and then follow the instructions on the
4.
screen.
The Setup Utility default settings are set when you exit the Setup Utility and go into effect when the computer
restarts.
NOTE:
Your password, security, and language settings are not changed when you restore the factory
default settings.
f10
enter to save your preferences.
Using the Setup Utility
while "Press <F10> to
93