Rear Usb Board - HP Pavilion DV5000t Maintenance And Service Manual

Remove the display switch module (2).
2.
Reverse this procedure to install the display switch module.

Rear USB board

Description
Rear USB board (includes rear USB board cable)
Before removing the rear USB board, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Optical drive (see
b.
Switch cover (see
c.
Keyboard (see
d.
Speaker assembly (see
e.
Display assembly (see
f.
Top cover (see
g.
Battery on page 46).
Hard drive on page 51)
Optical drive on page
Switch cover on page
Keyboard on page 64)
Speaker assembly on page
Display assembly on page
Top cover on page 76)
60)
62)
67)
70)
Component replacement procedures
Spare part number
449762-001
91