Connecting Pc Cards; To Insert Or Remove A Pc Card - HP OmniBook xt1000 Series Reference Manual

Connecting PC Cards

Add-On Devices
Connecting PC Cards
The notebook' s PC Card slot is available for storing data and expanding the
communication capabilities of the notebook. The notebook supports one standard Type II
or Type III PC Card (PCMCIA and CardBus). Zoomed Video cards are not supported.

To insert or remove a PC Card

Inserting a PC Card
1. Hold the PC Card with its face up and its connector holes toward the card slot.
2. Slide the PC Card all the way into the lower slot, until its outer edge is flush with the
casing of the notebook. Most cards are properly seated when the outer edge is flush
with the casing of the notebook, but some cards are designed to protrude from the
case.
76 Reference Guide