Planet ICS-2102ST User Manual page 67

Connection Target IP address
Object
• Target IP address 1
through 4
Assign Local Port
Object
• Local listen port
• Connection control
User's Manual of ICS-2x00T Serial Device Server Series
Description
IP addresses are used to deliver packets of data across a network and have what is
termed end-to-end significance. The network data is sent to the device in a first-in,
first-out (FIFO) method. During data transfer phase, data is transmitted sequentially
through established path-arriving at the destination in the order in which it was sent.
Description
The range of value is from 1 to 65535. The default is 5004 for port 1, 5005 for port 2,
5006 for port 3 and , 5007 for port 4.
The default is Startup/None.

Startup/None

Any Character/None

Any Character/Quiescent time

DCD On/DCD Off

DCD On/None

DSR On/DSR Off

DSR On/None
67