Figure 5 - Icon Assembly - HP OmniBook 5000 Familiarization Manual

Figure 5 - Icon Assembly

Lift the display straight up about 1 inch. The Icon Assembly will lift up with the display. Move the Icon
assembly out of the way. The cable from the Icon Assembly to the PC board does not need to be
removed if only the display is being removed. Otherwise, slide the connector sleeve up to remove the
Icon Assembly cable.
If only the Icon assembly is to be removed, the display may be lowered back into position.
To remove the Display Assembly, remove the two cables attaching the display module to the PC
board. Lastly, remove the two screws attaching the grounding straps to the PC board. The display
can now be removed the rest of the way.
30