Icon Assembly And Display Module (Hp Authorized Service Providers Only); Figure 4 - Display Screws - HP OmniBook 5000 Familiarization Manual
Hp omnibook 5000: supplementary guide
Hide thumbs
Also See for OmniBook 5000:
- User manual (102 pages) ,
- Getting started (27 pages) ,
- Familiarization manual (14 pages)
Table of Contents
Advertisement
Icon Assembly and Display Module
(HP Authorized Service Providers Only)
To remove the display module and/or Icon Assembly on the OmniBook 5000C, CT, and CTS turn the
unit over, raise the feet, and withdraw the two Phillips screws from under the feet in the bottom back
corners of the unit (see illustration below).
Figure 4 - Display Screws
Turn the unit right side up and dislodge the Icon assembly by placing the thumbs on each edge of the
assembly and pushing lightly (see illustration below). The front edge of the Icon Assembly will lift up
slightly
29
Display/Chassis
Screw (2)
Hide quick links:
Advertisement
Table of Contents
