Formatted Capacity - Seagate ST320LM010 Product Manual

Table 1 Drive Specifications Summary (continued)
Drive Specification
Operational Shock
Non-Operational Shock
Vibration, operating
Vibration, nonoperating
Nonrecoverable read errors
Rated workload
Warranty
Load-unload cycles
Supports Hotplug operation per the
Serial ATA Revision 3.2 specification
1. One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
2.1

Formatted Capacity

Model
Formatted Capacity
500GB model 500 GB
320GB model 320 GB
1. One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
Seagate Laptop Thin HDD Product Manual, Rev. H
ST500LM021, ST500LM023 & ST500LM024
Average rate of <55TB/year. The MTBF specification for the drive assumes the I/O workload does
not exceed the average annualized workload rate limit of 55TB/year. Workloads exceeding the
annualized rate may degrade the drive MTBF and impact product reliability. The average annual-
ized workload rate limit is in units of TB per year, or TB per 8760 power-on hours. Workload rate
limit = TB transferred × (8760/recorded power-on hours).
To determine the warranty for a specific drive, use a web browser to access the following web
page: http://www.seagate.com/support/warranty-and-replacements/.
From this page, click on the "Is my Drive under Warranty" link. The following are required to be
provided: the drive serial number, model number (or part number) and country of purchase. The
system will display the warranty information for the drive.
(1)
Guaranteed Sectors
976,773,168
625,142,448
400 Gs at 2 ms max
1000 Gs at 1 ms max
5–200 Hz: 2.0 Gs
201–500 Hz: 1.0 Gs
5–500 Hz: 5.0 Gs
14
1 per 10 bits read
600,000 at 25°C, 50% rel. humidity
Yes
Bytes per Sector
512 (logical) / 4096 (physical)
Drive Specifications
ST320LM010
8