Setting A Multiboot Express Prompt - Compaq Evo N620c Series Software Manual

Setting a MultiBoot Express Prompt

To set the notebook to display the MultiBoot startup location
menu each time the notebook is started or restarted:
1. Restart the notebook, then press
Based Setup message is displayed in the lower left of the
screen.
❏
❏
2. Use the arrow keys to select Advanced > Boot Options, then
press
3. In the Express Boot Popup Delay (Sec) field, select the
amount of time in seconds that you want the notebook to
display the startup location menu before it defaults to the
current MultiBoot setting. (When 0 is selected, the Express
Boot startup location menu is not displayed.)
4. To save your settings and exit Computer Setup, use the arrow
keys to select File > Save Changes and Exit, then follow the
instructions on the screen.
The new settings are saved when you exit Computer Setup.
Changes will be in effect when the notebook restarts.
Software Guide
To change the language, press
For navigation instructions, press
enter.
MultiBoot (Advanced Users Only)
while the F10 = ROM
F10
F2.
F1.
6–7