Compaq Evo N620c Series Software Manual page 36

Enabling SpeedStep in Computer Setup
Computer Setup, a non-Windows utility, includes settings to
enable or disable SpeedStep. For more information about
Computer Setup, refer to the "Setup and Diagnostic Utilities"
chapter.
To access the SpeedStep settings in Computer Setup:
1. Turn on or restart the notebook. Press
F10 = ROM Based Setup message is displayed in the lower
left of the screen.
❏
❏
2. Use the arrow keys to select Advanced > Device Options.
Under Intel SpeedStep Technology:
❏
❏
3. To save your preferences, use the arrow keys to select
File > Save Changes and Exit, then follow the instructions on
the screen.
Your preferences are set as you exit Computer Setup and are
in effect when the notebook restarts.
Software Guide
To change the language, press
For navigation instructions, press
Select Automatic to enable all SpeedStep settings in the
SpeedStep window.
Select Disable to set the notebook to run in Battery
Optimized mode and disable all SpeedStep settings in the
SpeedStep window.
while the
F10
F2.
F1.
Power
2–25