Enabling Devices In Computer Setup - Compaq Evo N620c Series Software Manual

Sequence for devices that boot as drive C:
1. Optical drive in a Port Replicator MultiBay or connected by
USB that contains a disc that boots as drive C.
2. Optical drive in the notebook MultiBay.
3. Hard drive in the notebook hard drive bay.
4. Hard drive in the notebook.
5. Hard drive in a Port Replicator MultiBay or connected
by USB.
6. NIC.
✎
Since no drive letter is associated with the NIC, changing the boot
order of a NIC does not affect drive letters of the other devices.

Enabling Devices in Computer Setup

The notebook can only start up from a USB device or the NIC
(network interface card) if that device has been enabled for
inclusion in MultiBoot.
To enable a device or location for inclusion in MultiBoot:
1. To open Computer Setup, turn on or restart the notebook,
then press
displayed in the lower left of the screen.
❏
❏
Software Guide
while the F10 = ROM Based Setup message is
F10
To change the language, press
For navigation instructions, press
MultiBoot (Advanced Users Only)
F2.
F1.
6–3