Setting The Multiboot Express Prompt; Responding To The Express Boot Menu - Compaq Evo N400c Hardware Manual

Drives
4. Toggle the Boot Order fields to the boot sequence you prefer.
5. To save your preferences and exit Boot Options, press
6. To close Computer Setup and restart the computer, select
File > Save Changes and Exit, then press

Setting the MultiBoot Express Prompt

To set the computer to display the MultiBoot startup location
menu each time it is started or restarted:
1. Restart the computer, then press
Based Setup message is displayed in the lower-left corner of
the screen.
2. Select Advanced > Boot Options, then press
3. In the Express Boot Popup Delay (Sec) field, select the
amount of time in seconds that you want the computer to
display the startup location menu before it defaults to the
current MultiBoot setting. (When zero is selected, the
Express Boot startup location menu does not display.)
4. To save your preferences and exit Boot Options, press
5. To close Computer Setup and restart the computer, select
File > Save Changes and Exit, then press

Responding to the Express Boot Menu

When the Express Boot Menu displays during startup, perform
one of the following steps during the time interval you set when
you enabled MultiBoot Express:
To specify a startup location from the Express Boot menu,
select your preference, then press
5–12
To change the language, press
For navigation instructions, press
F10.
while the F10 = ROM
F10
F2.
F1.
enter.
F10.
enter.
Hardware Guide
F10.
F10.