Table of Contents
Advertisement
6. DIAG. TEST OPERATION
Sensor 1 Check
SENSOR1
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es
0 0 0 0 0 0 0 0 , 1 0 1 1 0 0 1 1
Fixed to 0
Fixed to 1
Cutter home position switch status
0:
Home position
1:
Other position
Rewind full sensor status
0:
Normal
1:
Excess
Slit sensor #1 (ribbon rewind) status
0:
The detecting point is positioned
outside the slit.
1:
The detecting point is positioned
inside the slit.
Slit sensor #2 (ribbon feed) status
0:
The detecting point is
positioned outside the slit.
1:
The detecting point is
positioned inside the slit.
Fixed to 0
Strip sensor status
0:
Without label
1:
With label
Ribbon end sensor status
0:
Transmissive (with ribbon)
1:
Non-transmissive (ribbon end)
6-9
EM18-33017
6.2 SELF TEST MODE
Head up switch status
0:
Head opened
1:
Head closed
Advertisement
Chapters
Table of Contents
