General Care And Cleaning - Scotsman iceValet HD30 Product Manual

HD22 and HD30

General Care and Cleaning

Periodically inspect and clean the ice dispenser to
keep it operating at peak performance.
Wash the outside of the dispenser with warm water
and soap. Rinse off and wipe dry.
Cleaning and Sanitizing of the Ice Storage Bin:
The minerals, chlorine and other impurities in the
water are rejected from the water during the freeze
cycle of the ice machine. These minerals will
collect in the storage bin. The ice storage bin
should be cleaned and sanitized every 90 days.
1. Remove all of the ice stored inside the dispenser
bin and shut off the ice maker.
2. Disconnect electrical power to the dispenser.
3. Remove top front panel (in front of ice machine).
4. Remove the front panel.
Electrical Shock
and Moving Parts
Hazard
Disconnect Electrical
Power Before
Beginning Service or
Maintenance
Procedures.
September 2003
Page 12
5. Lift up and remove the access door at the front
of the bin
6. Reach into the opening, locate the hair pin and
pull it out of the shaft
7. Pull the sweep arm off the shaft and remove it
from the dispenser.
8. Pull the dispense wheel off the drive shaft and
remove it from the dispenser.
9. Mix a solution of 5 ounces of ice machine
cleaner to 1 gallon of warm (95
Wash the entire bin area and the delivery area.
Use a clean brush or cloth.
EZ Access
Door
o 0
F.-115 F.) water.