Ordinary Cleaning - Scotsman DICE NU Series Manual

CLEANING AND MAINTENANCE OF THE APPLIANCE

Ordinary cleaning

Before carrying out any ordinary or
extraordinary maintenance, it is necessary to
disconnect the appliance from the power
supply, close the water supply tap and wear
appropriate personal protective equipment
(e.g. gloves, etc...).
Ordinary cleaning is intended to keep the appliance in
good operating condition and prevent the proliferation of
bacteria.
To clean any component or accessory DO NOT use:
• abrasive or powder detergents;
• aggressive or corrosive detergents (e.g. hydrochloric
or sulphuric acid, caustic soda, etc,). Caution! Never
use these substances also when cleaning the floor
under the appliance;
• abrasive or sharp tools (e.g. abrasive sponges,
scrapers, steel brushes, etc.);
• steamed or pressurised water jets.
The user must carry out only routine maintenance, for
any extraordinary maintenance, contact a Service Centre
requesting service from an authorised technician.
The cleaning of the appliance is reserved only for suitable
and capable personnel and must not be carried out by
children.
The manufacturer's
disinfectant is the
only one tested
and guaranteed to
thoroughly sanitize all
surfaces in contact
with the ice, in full
compliance with
the construction
materials.
Contact the official
local Manufacturer/
Distributor for any
purchase.
F09
14
DAILY
Clean the ice scoop with the manufacturer's
disinfectant mixed with warm water (1 ml in 1 litre of
water, the dilution percentages are also indicated on
the rear label of the product). Finish rinsing and drying it
thoroughly.
MONTHLY
Clean the ice collection compartment with a soft
cloth soaked with the manufacturer's disinfectant mixed
with warm water (1 ml in 1 litre of water, the dilution
percentages are also indicated on the rear label of the
product). Finish with a thorough rinsing.
Clean the external surfaces with a soft cloth
moistened with a specific product for stainless steel, free
of acid, aggressive or abrasive agents. For how to use it,
refer to the instructions provided by the manufacturer of
the chosen detergent.
D
F10
F10 Clean the front or side "D" air vents with a
soft bristle brush or vacuum cleaner.
F11 Remove air filter "C" (if present), wash it with
warm water and soap, rinse it thoroughly and reposition
it only after it has completely dried.
Clean the control panel and the door with a soft cloth
slightly moistened with a neutral detergent suitable
for delicate surfaces. For how to use it, refer to the
instructions provided by the manufacturer of the chosen
detergent.
Filter "C" is present only
in air-cooled machines
C
EVERY 6 MONTHS / 1 YEAR
Contact the official local Dealer/Distributor for washing,
descaling and sanitizing the water circuit.
EVERY YEAR
Contact your official local Dealer/Distributor for the
annual maintenance plan and XSafe lamp replacement.
Proper and timely maintenance is essential
to ensure health safety and maintain excellent
performance of the appliance over time.
C
F11
15