Installation - Electrical And Ice Machine Assembly - Scotsman iceValet HD30 Product Manual

Installation - Electrical and Ice Machine Assembly

The dispenser is supplied with a power cord. Do
not use with an extension cord. The unit must be
plugged into a properly grounded outlet.
The dispenser must be installed so that it is a
separate piece of equipment from the ice machine.
The drains and electrical supply must be separate.
Follow All Local State and National Codes
Ice Machine
All models: Place the dispenser in the location
where it will be used. Level the top edge of the
dispenser front to back and left to right.
Sanitize the dispenser bin with a locally
approved sanitizer. See page 13.
Place the ice machine on the dispenser and secure
it to the dispenser with the hardware and straps
from the ice machine. Install it according to the
instructions in the manual included with the ice
machine.
Back View of HD30 Installation
Fasten Ice Machine to Dispenser
Ice Machine
Drain, Keep
Separate
Floor Drain
September 2003
Page 9
HD22 and HD30
Back View of HD22 Installation