Chicago Electric 90236 Operating Instructions Manual page 10

Electrical Precautions:
1. All connections and conduits from the Generator to the load must only be installed
by trained and licensed electricians, and in compliance with all relevant local, state,
and federal electrical codes and standards, and other regulations where applicable.
2. The Generator must be properly earth-grounded by a licensed electrician in
accordance with all relevant electrical codes and standards before operation.
3. If an extension cord (not included) is used, make sure to use only UL
cords having the correct gauge and length. (See Figure A.)
REQUIRED MINIMUM EXTENSION CORD GAUGE – 120/ 240 VOLT
NAMEPLATE
AMPERES
(At Full Load)
0 - 5
5.1 - 8
8.1 - 12
12.1 - 15
15.1 - 20
SKU 90236 For technical questions, please call 1-800-444-3353.
FIGURE A
EXTENSION CORD LENGTH
0 - 25 25 - 50
Feet Feet
16 16
16 16
14 14
12 12
10 10
50 -100 100 – 150
Feet Feet
16 12
14 10
12 -
10 -
10 -
®
approved
150– 200
Feet
12
-
-
-
-
Page 10