Sherwood R-774 Operating Instructions Manual page 43

R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 43
Continued
4.
While displaying "CODE
password (4-digit number) with using the
NUMERIC (0~9) buttons.
• When you input the correct code, the current channel is
locked or unlocked.
• If the wrong password is input, "CODE ERR(OR)" is
displayed. In this case, input the password again by
performing the steps 2 ~ 4.
• When "CODE
disappears, repeat again from the above step 2.
■Notes:
• The default password is "0000".
You can change this password to new one. (For details,
refer to "Editing lock code" below.)
• The channels to which the parental lock is applied cannot
be tuned in by performing channel search or category
search.
Editing lock code
• You can change the password to the desired.
1.
In the SIRIUS mode, press and hold down the
ENTER button for more than 3 seconds.
• Then "EDIT CODE" (Edit lock code) is displayed for
several seconds.
All manuals and user guides at all-guides.com
", input the
" (or "PARENTAL", etc.)
2.
Press the ENTER button.
• Then "CUR " is displayed for several seconds.
• Each time the CURSOR UP(▲)/DOWN(▼) buttons are
pressed, "EDIT CODE" or "PARENTAL" is selected.
3.
Input the current code (4-digit number), then
press the ENTER button.
• If you input the correct code, "NEW
for several seconds.
• If the wrong password is input, "CODE ERR(OR)" is
displayed. In this case, input the password again by
performing the steps 1~3.
4.
Input the new password (4-digit number) with
using the NUMERIC (0~9) buttons, then press the
ENTER button.
• Then "CFM " is displayed for several seconds.
5.
For confirmation, input the new password again
with using the NUMERIC (0~9) buttons, then
press the ENTER button.
• If the correct password is input, "MODIFIED" is displayed
and new password is modified.
• When " ~ " (or "EDIT CODE", etc.) disappears,
repeat again from the above step 1.
■Note:
• Do not forget the password once you change it. If you
forgot your password, you cannot lock or unlock the
channel.
43
" is displayed