Sherwood R-774 Operating Instructions Manual page 59

R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 59
When selecting the Speaker Configuration
1.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the Speaker Configuration, then press the CURSOR
RIGHT(▶) button to enter the setting menu.
2.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired speaker, then press the CURSOR
RIGHT(▶) button to enter its setting menu.
3.
Press the CURSOR UP(▲)/DOWN(▼) buttons to set the selected speaker as desired, then press the
ENTER button.
Yes/No: Select the desired depending on whether the speakers are connected or not.
2 Channel/1 Channel (Left) : Select the desired depending on the number of speakers connected to SURROUND BACK/
• When the CURSOR LEFT(◀) button is pressed on the setting menu, the previous menu will be returned to.
■Notes :
• When speakers are not set to "No", you should set their distances from listening position and crossover frequencies
according to their frequency characteristics. (For details, refer to "When selecting the Speaker Crossover" on page 60 and
"When selecting the Speaker Distance" on page 61.)
• When the "Surround" is set to "No", "Surr back" cannot be set to "2 Channel" or "1 Channel(Left)".
• When the surround back channels' power amplifier is assigned to "Bi AMP" or "Room 2", the "Surr Back" cannot be
selected. (For details, refer to "When selecting the AMP Assign" on page 54.)
4.
Repeat the above steps 2 and 3 until the speakers are all set as desired.
All manuals and user guides at all-guides.com
MULTI channels.
59
Front
Center
BACK
Surround
Surr Back
Subwoofer
NEXT