Rear Cover - HP Compaq 6730b Maintenance And Service Manual

Rear cover

Description
Rear cover
Before removing the rear cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see
5. Remove the following:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Switch cover (see
e. Display assembly (see
f. Top cover (see
Remove the rear cover:
1. Turn the computer upside down, with the rear panel toward you.
2. Remove the four Torx8 T8M2.5×9.0 screws that secure the rear cover to the base enclosure.
3. Turn the computer right side up, with the front toward you.
Battery on page 46).
Hard drive on page 52)
Optical drive on page
Keyboard on page 60)
Switch cover on page
Display assembly on page
Top cover on page 80)
55)
65)
74)
Component replacement procedures
Spare part number
487143-001
91