HP Compaq 6730b Maintenance And Service Manual page 85

12. Lift the display assembly (2) straight up and remove it.
13. If it is necessary to replace the display bezel or display hinges, remove the following:
(1) Four beveled rubber screw covers on the display bezel top edge. All rubber screw covers are
available in the Display Rubber Kit, spare part number 486775-001.
(2) Two flat rubber screw covers on the display bezel bottom edge. All rubber screw covers are
available in the Display Rubber Kit, spare part number 486775-001.
(3) Six Torx T8M2.5×7.0 screws that secure the display bezel to the display assembly.
14. Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the display
bezel until the bezel disengages from the display enclosure.
Component replacement procedures 77