Specifications; Unpacking; Instructions For Putting Into Use; Functions - Chicago Electric 67845 Set Up And Operating Instructions Manual

speCIFICatIons

Battery Pack 18 V / NiCd / 1700 mAh
0 - 2,100 RPM / 3,000 BPM (No Load)
Speed
205 ft-lbs Forward (clockwise)
Average
211 ft-lbs Reverse (counterclockwise)
Torque
Drive 1/2" Square Drive
Bolt Capacity 1/2" (13 mm)

unpaCkIng

When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon as
possible.
InstruCtIons For puttIng
Into use
read the entIre Important
saFetY InFormatIon
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
From aCCIdental
operatIon:
turn the power switch of the tool
off and unplug the tool from its
electrical outlet before
assembling or making any
adjustments to the tool.
note: For additional information regarding the
parts listed in the following pages, refer
to the Assembly Diagram near the end of
this manual.
Page 8
to preVent
serIous InjurY
For technical questions, please call 1-800-444-3353.

Functions

Impact Anvil (6)
Trigger (27)
Battery Pack (35)
Battery Pack
Release Button
Figure 1

operatIng InstruCtIons

read the entIre Important
saFetY InFormatIon
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.

tool set up

From aCCIdental
operatIon:
turn the power switch of the tool
off and unplug the tool from its
electrical outlet before adjusting
tool or installing accessories.
Housing, right & left
(24 & 28)
Forward/Reverse
Lever (26)
Handle
to preVent
serIous InjurY
SKU 67845