Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
HIGH SPEED
3" ELECTRIC
CUT-OFF TOOL
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2011 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 15b
Advertisement
Table of Contents
Related Manuals for Chicago Electric 68523
Summary of Contents for Chicago Electric 68523
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: General Power Tool Safety Warnings
The term ″power tool″ in the warnings refers with your finger on the switch or energizing power to your mains-operated (corded) power tool tools that have the switch on invites accidents. or battery-operated (cordless) power tool. Page 2 For technical questions, please call 1-888-866-5797. Item 68523... - Page 3 The eye protection and the work to be performed. Use of the must be capable of stopping flying debris Item 68523 For technical questions, please call 1-888-866-5797. Page 3...
- Page 4 19. Do not lay the tool down until it has come to a complete stop. Moving parts can grab the surface and pull the tool out of your control. Page 4 For technical questions, please call 1-888-866-5797. Item 68523...
-
Page 5: Kickback And Related Warnings
2. The guard must be securely attached to the power tool and positioned for maximum INSTRUCTIONS. safety, so the least amount of wheel is exposed towards the operator. The guard Item 68523 For technical questions, please call 1-888-866-5797. Page 5... -
Page 6: Double Insulated Tools: Tools With Two Prong Plugs
7. Make sure the extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified electrician before using it. Page 6 For technical questions, please call 1-888-866-5797. Item 68523... - Page 7 Wear hearing protection. WARNING marking concerning Risk of Fire. Do not cover ventilation ducts. Keep flammable objects away. WARNING marking concerning Risk of Electric Shock. Properly connect power cord to appropriate outlet. Item 68523 For technical questions, please call 1-888-866-5797. Page 7...
-
Page 8: General Operating Instructions
8. Disconnect Power Cord from outlet. Clean, then work area without creating a tripping hazard or store the tool indoors out of children’s reach. exposing cord to possible damage. The power Page 8 For technical questions, please call 1-888-866-5797. Item 68523... -
Page 9: Troubleshooting
See Extension Cords in Grounding section on page 6. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Item 68523 For technical questions, please call 1-888-866-5797. Page 9... -
Page 10: Assembly Diagram
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 10 For technical questions, please call 1-888-866-5797. Item 68523... - Page 11 Assembly Diagram Item 68523 For technical questions, please call 1-888-866-5797. Page 11...
- Page 12 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.