Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
O S C I L L A T I N G
REV 14i
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2014 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
(Angled Cutter sold separately)
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Advertisement
Table of Contents
Related Manuals for Chicago Electric 62302
Summary of Contents for Chicago Electric 62302
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Important Safety Information
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Page 2 For technical questions, please call 1-888-866-5797. Item 62302... -
Page 3: Electrical Safety
Power tools are dangerous in the hands of untrained users. Item 62302 For technical questions, please call 1-888-866-5797. Page 3... - Page 4 & Safety Code § 25249.5, et seq.) • Any power cord must be properly grounded. Ground Fault Circuit Interrupter (GFCI) should also be implemented – it prevents sustained electrical shock. Page 4 For technical questions, please call 1-888-866-5797. Item 62302...
-
Page 5: Vibration Safety
2. Do not smoke during use. Nicotine reduces the blood supply to the hands and fingers, increasing the risk of vibration-related injury. Item 62302 For technical questions, please call 1-888-866-5797. Page 5... -
Page 6: Grounded Tools: Tools With Three Prong Plugs
Association, and the National Electrical Code. 2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See 3-prong plug and Outlet.) Outlets for 2-prong plug Page 6 For technical questions, please call 1-888-866-5797. Item 62302... -
Page 7: Extension Cords
Risk of Fire. Alternating Current Do not cover ventilation ducts. Keep flammable objects away. WARNING marking concerning Amperes Risk of Electric Shock. Properly connect power cord to appropriate outlet. Item 62302 For technical questions, please call 1-888-866-5797. Page 7... - Page 8 Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Assembly Diagram on page 6. Functions Power Switch Spindle Hex Wrench Angled Cutter (sold separately) Page 8 For technical questions, please call 1-888-866-5797. Item 62302...
-
Page 9: Tool Set Up
Cap Screw. Make sure the cupped side of the Large Washer is toward the tool. While holding the attachment over the pins on the tool, thread the Cap Screw in place. Item 62302 For technical questions, please call 1-888-866-5797. Page 9... -
Page 10: Work Piece And Work Area Set Up
Store the Tool in a clean, dry, safe 4. Avoid contact with foreign objects such as metal location out of reach of children and other screws and nails when sanding, scraping, or cutting. unauthorized persons. Page 10 For technical questions, please call 1-888-866-5797. Item 62302... -
Page 11: Cleaning, Maintenance, And Lubrication
The Sanding Sheets should not be dull Tool is damaged, it must be replaced or contain excessive debris build-up. only by a qualified service technician. The Angle Scraper and Cutting Blade should be clean and sharp. Item 62302 For technical questions, please call 1-888-866-5797. Page 11... -
Page 12: Troubleshooting
See Extension Cords in GROUNDING section. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Page 12 For technical questions, please call 1-888-866-5797. Item 62302... - Page 13 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 62302 For technical questions, please call 1-888-866-5797. Page 13...
-
Page 14: Please Read The Following Carefully
Connecting Plate C-Clip Screw St3.9x10 Bearing 625Z Back Housing Sealing Washer Screw St3.9x10 Middle Cover Screw St3.9x10 Bearing 608Z Cord Clamping Armature Screw St3.9x14 Bearing 626Z Cable Sheath Bearing Bush Cable Page 14 For technical questions, please call 1-888-866-5797. Item 62302... -
Page 15: Assembly Diagram
Assembly Diagram Item 62302 For technical questions, please call 1-888-866-5797. Page 15... - Page 16 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.