General Tasks; Changing A Java Card Pin; Selecting The Smart Card Reader - HP Compaq NX6315 Getting Started Manual

General tasks

The "General" page allows you to perform the following tasks:
●
Change a Java Card PIN
●
Select the smart card reader
NOTE
available if you have more than one smart card reader on the computer.

Changing a Java Card PIN

To change a Java Card PIN:
NOTE
1. Select Start > All Programs > HP ProtectTools Security Manager.
2. In the left pane, click Java Card Security, and then click General.
3. Insert a Java Card (with an existing PIN) into the smart card reader.
4. In the right pane, click Change.
5. In the Change PIN dialog box, enter the current PIN in the Current PIN box.
6. Enter a new PIN in the New PIN box, and then enter the PIN again in the Confirm New PIN box.
7. Click OK.

Selecting the smart card reader

Ensure that the correct smart card reader is selected in Java Card Security before using the Java Card.
If the correct reader is not selected in Java Card Security, some of the features may be unavailable or
incorrectly displayed.
To select the smart card reader:
1. Select Start > All Programs > HP ProtectTools Security Manager.
2. In the left pane, click Java Card Security, and then click General.
3. Insert the Java Card into the smart card reader.
4. In the right pane, under Smart Card Reader, click the correct reader.
18 Chapter 3 Java Card Security for HP ProtectTools
The smart card reader uses both Java Cards and smart cards. This feature is
The Java Card PIN must be between 4 and 8 numeric characters.
ENWW