Assigning A Name To A Java Card; Setting Power-On Authentication - HP Compaq NX6315 Getting Started Manual

Assigning a name to a Java Card

You must assign a name to a Java Card before it can be used for power-on authentication.
To assign a name to a Java Card:
1. Select Start > All Programs > HP ProtectTools Security Manager.
2. In the left pane, click Java Card Security, and then click Advanced.
3. When the Setup Password dialog box displays, enter your Computer Setup setup password, and
then click OK.
4. Insert the Java Card into the smart card reader.
NOTE
allowing you to enter a new PIN.
5. In the right pane, under Java Card name, click Change.
6. Enter a name for the Java Card in the Name box.
7. Enter the current Java Card PIN in the PIN box.
8. Click OK.

Setting power-on authentication

When enabled, power-on authentication requires you to use a Java Card to start the computer.
The process of enabling Java Card power-on authentication involves the following steps:
1. Enable Java Card power-on authentication support in BIOS Configuration or Computer Setup.
Refer to
Chapter 5,
2. Enable Java Card power-on authentication in Java Card Security. Refer to
power-on authentication and creating an administrator Java
3. Create and enable the administrator Java Card.
20 Chapter 3 Java Card Security for HP ProtectTools
If you have not assigned a PIN to this card, the Change PIN dialog box opens,
"Enabling and disabling smart card or Java Card power-on authentication
"BIOS Configuration for HP ProtectTools."
Card," later in this chapter.
support," in
"Enabling Java Card
ENWW