Accessing The Hp Protecttools Security Manager; Understanding Security Roles - HP Compaq NX6315 Getting Started Manual

Accessing the HP ProtectTools Security Manager

To access the HP ProtectTools Security Manager from the Windows® Control Panel:
Select Start > All Programs > HP ProtectTools Security Manager.
▲
NOTE
ProtectTools by logging on to Credential Manager directly from the Windows logon screen. For
more information, refer to
"Credential Manager for HP

Understanding security roles

In managing computer security (particularly for large organizations), one important practice is to divide
responsibilities and rights among various types of administrators and users.
NOTE
person.
For HP ProtectTools, the security duties and privileges can be divided into the following roles:
●
Security officer—Defines the security level for the company or network and determines the security
features to deploy, such as smart cards, biometric readers, or USB tokens.
NOTE
cooperation with HP. For more information, visit http://www.hp.com.
●
IT administrator—Applies and manages the security features defined by the security officer. Can
also enable and disable some features. For example, if the security officer has decided to deploy
smart cards, the IT administrator can enable smart card BIOS security mode.
●
User—Uses the security features. For example, if the security officer and IT administrator have
enabled smart cards for the system, the user can set the smart card PIN and use the card for
authentication.
2 Chapter 1 Introduction
After you have configured the Credential Manager module, you can also open HP
"Logging on to Windows with Credential
ProtectTools."
In a small organization or for individual use, these roles may all be held by the same
Many of the features in HP ProtectTools can be customized by the security officer in
Manager," in Chapter 6
ENWW