Advertisement
Step 2
B15 ctr
(2)
The main frame pieces reinforce
the walls. These pieces will later be
installed in the center and at the top
edge of the rear wall. Proceed as
follows:
1
Overlap the rear wall channel
pieces as shown in the figure and
fasten the two pieces together with
one bolt in the center hole ( ve holes
will align).
2
Overlap the rear wall angle pieces
as shown in the figure and fasten
them together with one bolt in the
center hole.
3
Double check the length of each
and set these pieces aside for later
use.
Parts Needed For
Frame Assemblies
9924
STEP
1
6615
STEP
3
15
6615 Rear Wall Angle (2)
9924 Rear Wall Channel (2)
Rear Wall Channel
94 5/8" 240,3 cm
9924
6615
STEP
2
Rear Wall Channel
94 5/8" 240,3 cm
Rear Wall Angle
94 5/8" 240,3 cm
Rear Wall Angle
94 5/8" 240,3 cm
Advertisement
