Schwinn 290 Assembly Manual / Owner's Manual page 34

Condition/Problem
Resistance does not
change (machine turns on
and operates)
sleep mode) while in use
Unit rocks/does not sit
level
to pedal
Clicking sound when
pedaling
to pedal
Seat Assembly shifts /
squeaks when in use
Console continuously
cycles through program
screens
34
Things to Check
Check magnet position
(requires shroud removal)
Check Speed Sensor
(requires shroud removal)
Check data cable integrity
Check data cable
connections/orientation
Check Servo Motor
(requires shroud removal)
Check Console
Check electrical (wall)
outlet
Check connection at front
of unit
Check data cable integrity
Check data cable
connections/orientation
Reset machine
Check magnet position
(requires shroud removal)
Check Speed Sensor
(requires shroud removal)
Check leveler adjustment
Check surface under unit
Check pedal to crank arm
connection
Check pedal to crank arm
connection
Check pedal to crank
connection
Hardware
Console is in demonstra
tion mode
Speed sensor should be aligned with magnet and connected to
If the above steps do not resolve the problem, contact Cus
tomer Service (if inside US/Canada) or your local distributor (if
Speed sensor should be aligned with magnet and connected to
Check hardware that attaches Seat assembly, and fully tighten
Press and hold the Schwinn
Solution
™