Table of Contents
Advertisement
English
11.6
Thinning with a brush knife
► Dip the metal cutting attachment into the
thicket from above.
► Do not lift metal cutting tool above waist
height.
11.7
Adjusting Nylon Line
11.7.1
Line Feed on AutoCut Mowing Head
► Tap the rotating mowing head on the ground.
About 30 mm of fresh nylon line is advanced.
The line limiting blade in the deflector trims the
mowing lines to the correct length.
2
1
Automatic feed does not operate if the mowing
lines are shorter than 25 mm.
► Shut off the engine.
► Depress the spool (1) on the mowing head
and hold it depressed.
► Pull out the mowing lines (2).
► If the mowing lines (2) cannot be pulled out to
the required length: Replace the spool (1) or
the mowing lines (2).
The spool is empty.
11.7.2
Line Feed on SuperCut Mowing
Heads
Mowing lines are adjusted automatically. The line
limiting blade in the deflector trims the mowing
lines to the correct length.
Automatic feed will not take place if the mowing
lines are shorter than 40 mm.
► Shut off the engine.
► Pull out the mowing lines.
► If the mowing lines cannot be pulled out to
required length: Replace nylon line.
18
The spool is empty.
12 After Finishing Work
12.1
When Work is Finished
► Shut off the engine.
► Allow trimmer to cool down.
► If the brushcutter is wet: Allow the brushcutter
to dry.
► Clean the brushcutter.
► Clean the deflector.
► Clean the cutting attachment.
► If a metal cutting attachment is mounted: Fit
the matching transport guard.
13 Transporting
13.1
Transporting the brushcutter
► Shut off the engine.
► If a metal cutting attachment is mounted:
Attach the appropriate transport guard.
1
► Loosen the wing screw (1).
► Remove shaft (2) from the coupling sleeve (3).
► Mount the protective cap (4).
4
► Secure the control handle (4) with the
strap (5).
Carrying the brushcutter
► Carry the trimmer on your back.
Transporting the trimmer in a vehicle
► Secure the brushcutter to prevent it tipping
over or moving.
14 Storing
14.1
Storing the Brushcutter
► Shut off the engine.
12 After Finishing Work
3
4
2
5
0458-771-0101-A
Advertisement
Table of Contents
