Stihl FR 460 TC M Series Instruction Manual page 10

English
4.9 Reactive forces
Kickout can be caused for the following reasons:
– The shaded area or the black area of the rotat‐
ing metal cutting attachment comes into con‐
tact with a solid object and is suddenly braked.
– The rotating metal cutting attachment gets
pinched in the cut.
The risk of kickout is greatest in the black area.
WARNING
■ These situations can abruptly decelerate or
stop rotation of the cutting attachment and
cause the cutting attachment to be thrown to
the right or in the direction of the user (black
arrow). The user can lose control of the trim‐
mer. This may result in serous or fatal injury to
people.
► Hold the trimmer firmly with both hands.
► Work as described in this user manual.
► Do not use the black area for cutting.
► Use a combination of cutting attachment
and deflector recommended in this instruc‐
tion manual.
► Sharpen the metal cutting attachment cor‐
rectly.
► Work with the engine running at full throttle.
4.10 Transporting
WARNING
■ The gearbox can get hot during operation.
There is a risk of burn injuries.
► Do not touch a hot gearbox.
■ The trimmer may turn over or shift during
transport. This may result in personal injuries
and damage to property.
► Shut off the engine.
► If a metal cutting attachment is mounted: Fit
the transport guard.
► Secure the trimmer with lashing straps or a
net to prevent it turning over and moving.
■ The muffler and engine may be hot after a
period of operation. There is a risk of burn
injuries.
► Carry the trimmer on your back.
10
4.11 Storing
WARNING
■ Children are not aware of and cannot assess
the dangers of a trimmer and can be seriously
injured.
► Shut off the engine.
► If a metal cutting attachment is mounted: Fit
the transport guard.
► Store the trimmer out of the reach of chil‐
dren.
■ Dampness can corrode the electrical contacts
on the trimmer and metal components. This
can damage the trimmer.
► Store the trimmer in a clean and dry condi‐
tion.
4.12 Cleaning, maintenance and
repair
WARNING
■ The cutting attachment can start rotating unin‐
tentionally if the engine is running during
cleaning, maintenance or repair operations.
This may result in serious injury to people and
damage to property.
► Shut off the engine.
■ The muffler and engine may be hot after a
period of operation. This can result in burn
injuries.
► Wait until the muffler and engine cool down.
■ The gear housing can get hot during opera‐
tion. There is a risk of burn injuries.
► Do not touch a hot gear housing.
■ Aggressive cleaning agents, a water jet or
pointed objects can damage the trimmer,
deflector or the cutting attachment. If the trim‐
mer, deflector and cutting attachment are not
cleaned correctly, components may no longer
function properly or safety devices may be
rendered inoperative. Persons may be seri‐
ously injured.
► Clean the brushcutter, deflector and cutting
attachment as described in this User Man‐
ual.
■ If the brushcutter, deflector or cutting attach‐
ment is not maintained or repaired as descri‐
bed in this User Manual, components may no
longer function properly or safety devices may
be rendered inoperative. This can result in
serious or fatal injuries.
► Maintain or repair the brushcutter and the
deflector as described in this User Manual.
4 Safety Precautions
0458-771-0101-A