Table of Contents
Advertisement
To replace the license plate lamp bulb:
1. Remove the license plate assembly by turning the
two screws counterclockwise.
2. Turn and pull the license plate lamp forward
through the fascia opening.
3. Turn the bulb socket counterclockwise and pull the
bulb straight out of the socket.
4. Push the new bulb in and turn it clockwise to
install.
5. Replace the license plate lamp by pushing it
through the fascia opening.
6. Turn the two screws that hold the license plate
lamp clockwise to reinstall.
Back-up Lamp and Taillamp
License Plate Lamp
Turn Signal Lamp
For replacement bulbs not listed here, contact your
dealer/retailer.
921
168
3156
6-47
Advertisement
Table of Contents
