Table of Contents
Advertisement
17
Using the Main Menu
If you want to use Lorex's email server (recommended):
1. Under Mail Select, select Lorex Mail to use the Lorex email server to send out alarm notifi-
cations. This is the recommended setting.
2. Configure the following:
• Email Schedule: Configure time periods during which email alerts will be sent.
• Receiver: Enter the email address that will receive alerts.
• Sender: Enter the sender's email address.
• Subject: Enter the subject line for the email alert.
• Attachment: Check to include an image attachment of the camera.
NOTE
You must enable the Snapshot option for motion detection on each camera you would to receive attach-
ments. For details, see 12 Motion Detection, page 37.
• Interval: Enter the interval between alert emails.
• Health Enable: Check to enable health check emails. Health check emails will be sent
periodically to ensure that the system is functioning normally. Enter the interval in mi-
nutes for health check emails.
3. Click Test to send a test email.
4. Click Apply to save settings.
#LX400113; r. 9.0/57192/57197; en-US
75
Advertisement
Table of Contents
