Installing A New Hard Drive - Lorex N4K2-86BB User Manual

22 Replacing the Hard Drive
4. Remove the power and SATA cables from the hard drive.
5. Carefully pick up the hard drive to lift the bottom panel, being mindful of the sharp edges of
the bottom panel. Remove the hard drive screws (4×) from the bottom panel. Hold onto the
hard drive so it remains in place when all screws have been removed.
6. If you are not immediately going to install a new hard drive, replace the top panel and the 6
bottom panel screws.

22.2 Installing a New Hard Drive

CAUTION
Make sure that the system is OFF and the power adapter is disconnected before removing/installing a hard drive.
#LX400113; r. 9.0/57192/57197; en-US 102