Table of Contents
Advertisement
Comments:
• •
Your fax will not accept the signal to begin reception (5
loaded in its feeder.
• •
If you have set Option Setting 15 to NO and hear a fax tone when you answer
the extension phone, you must press 5,
phone, or walk over to the fax, pick up the handset, and press the
START/MEMORY key if you are on a pulse dial only phone.
• •
The code used to activate fax reception from a tone dial extension phone
**
(5
) can be changed if desired. See Option Setting 4 (Tel/Fax Remote
Number) in Chapter 8, Option Settings.
2 in 1 Print
To save paper, you can have the size of your incoming faxes reduced
by 55%. This will allow you to receive, for example, a 2-page
document on one page (note that this may not be possible if the
document pages are longer than your printing paper). To turn on this
function, follow the steps below.
1
Press these keys:
The display will show:
2
Press 1 to turn on the function, or 2 to turn it off.
The display will show:
3
Press the STOP key.
*
*
, and
FUNCTION
6
2 IN 1 PRINT
YES
NO
1
2
or
PRINT CONTRAST
STOP
Receiving Documents
**
) if a document is
if you are on a tone dial
53
Advertisement
Table of Contents
