Depth Adjustment - Bostitch BTFP1850K Operation And Maintenance Manual

DEPTH ADJUSTMENT

Always disconnect air supply: 1. Before making adjustments; 2. When
servicing the tool; 3. When clearing a jam; 4. When tool is not in use;
5. When moving to a different work area, as accidental actuation may
occur, possibly causing injury.
SB-1842BN, SB1850BN, SB-1664FN, SB-125BN, BTFP1850K, BTFP1664K
FASTENER CONTROL ADJUSTMENT
The Fastener Control adjustment feature provides close control of the fastener drive depth;
from flush with the work surface to shallow or deep countersink. First, set the air pressure for
consistent drive in the specific work. Then use the Fastener Control adjustment to give the
desired depth of drive.
TO ADJUST FASTENER CONTROL ADJUSTMENT
1. With air pressure set, drive a few fasteners into a representative material sample to
determine if adjustment is necessary.
2. If adjustment is required, disconnnect air supply.
SB-1664FN
BTFP1664K
Depth Adjustment Knob
SB-1842BN
SB-1850BN
SB-125BN
BTFP1850K
Depth Adjustment Knob
-12-