License Plate Lamp; Replacement Bulbs; Windshield Wiper Blade Replacement - Chevrolet 2009 Impala Owner's Manual

License Plate Lamp

To replace one of these bulbs:
1. Turn the lamp assembly counterclockwise and pull
the lamp assembly out of the connector.
2. Pull the old bulb from the lamp assembly, keeping
the bulb straight as you pull it out.
3. Install the new bulb.
4. Reverse Steps 1 through 3 to reinstall the license
plate lamp.

Replacement Bulbs

Exterior Lamp
Back-Up
Front Parking/Turn Signal
License Plate Lamp
Headlamps
High-Beam
Low-Beam
Sidemarker
Stoplamp, Taillamp, and Turn
Signal
For replacement bulbs not listed here, contact your
dealer/retailer.
Windshield Wiper Blade
Replacement
Windshield wiper blades should be inspected for wear
or cracking. See Scheduled Maintenance on page 6-4
for more information on wiper blade inspection.
Replacement blades come in different types and are
removed in different ways. Here's how to remove the
wiper blade:
1. Pull the windshield wiper arm connector away from
Bulb Number
921
3157NAK
194
H9
H11
194
2. While holding the wiper arm, pull the clip up from the
3057
3. Install the new wiper blade onto the wiper arm and
the windshield.
blade connecting point, and pull the blade assembly
down toward the windshield to remove it from the
wiper arm.
snap the clip down into place.
5-51