Chevrolet 2009 Impala Owner's Manual page 308

(B) Tire Ply Material
:
number of plies in the sidewall and under the tread.
(C) Tire Identification Number (TIN)
and numbers following the DOT (Department of
Transportation) code is the Tire Identification
Number (TIN). The TIN shows the manufacturer
and plant code, tire size, and date the tire was
manufactured. The TIN is molded onto both sides of
the tire, although only one side may have the date
of manufacture.
(D) Maximum Cold Inflation Load Limit
Maximum load that can be carried and the
maximum pressure needed to support that load.
(E) Tire Inflation The temporary use tire or
:
compact spare tire should be inflated to 60 psi
(420 kPa). For more information on tire pressure
and inflation see Inflation - Tire Pressure on
page 5-60.
(F) Tire Size A combination of letters and
:
numbers define a tire's width, height, aspect ratio,
construction type, and service description. The
letter T as the first character in the tire size means
the tire is for temporary use only.
5-56
The type of cord and
The letters
:
:
(G) TPC Spec (Tire Performance Criteria
Specification) Original equipment tires designed
:
to GM's specific tire performance criteria have
a TPC specification code molded onto the sidewall.
GM's TPC specifications meet or exceed all
federal safety guidelines.
Tire Size
The following illustration shows an example of a
typical passenger vehicle tire size.
(A) Passenger (P-Metric) Tire
version of a metric tire sizing system. The letter P
as the first character in the tire size means a
passenger vehicle tire engineered to standards
set by the U.S. Tire and Rim Association.
(B) Tire Width The three-digit number indicates
:
the tire section width in millimeters from sidewall
to sidewall.
The United States
: