How Do I Clean The Display; Troubleshooting - Sceptre X405BV Manual

Table of Contents

Advertisement

How do I clean the Display ?

IMPORTANT
1.
The power cable has to be removed from the socket before cleaning the
Display.
2.
Do not use volatile solvent (alcohol, rosin, and toluene) to clean the
Display. These types of chemicals might damage the housing and the
LCD glass.
Cleaning the bezel and remote control
1.
Use a 100% cotton cloth or micro-fiber cloth for cleaning.
2.
If the remote control or bezel is dirty to the point where you cannot
simply dry wipe it, please lightly dampen the wiping material (the wiping
material cannot be dripping wet, because if water drips into the
panel it will cause malfunction and possible permanent damage to
the panel which will not be covered under the warranty) with clean
water and wipe again. Wipe the display with a dry micro-fiber cloth or
100% cotton cloth afterwards.
Please Note:
Cleaning the Screen
1.
Use a 100% cotton cloth or micro-fiber cloth for cleaning.
2.
The LCD screen glass is extremely fragile. Do not scrape it with any
material. Do not press or tap the screen to avoid cracking. When the
screen is dirty to the point where you cannot simply dry wipe it, please
lightly dampen the wiping material with clean water and wipe again.
Wipe the display with a dry micro-fiber cloth or 100% cotton cloth
afterwards.

Troubleshooting

The directional button and ENTER buttons on the display's remote have
limited control over the cell phone's OS and the programs within. Some
programs will respond to the control, some will not. For maximum control
please use the cell phone's touch screen instead of the display's remote.
Make sure you wring the water out of the cloth before
cleaning the bezel or remote in order to prevent water
from penetrating into the electronics.
- 49 -
www.SCEPTRE.com
SCEPTRE X405 HD Display User Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

X405

Table of Contents