Table of Contents
Advertisement
Telephone settings
Telephone base settings
Home area code
If you dial seven digits to make a local call (no area code required), enter
your area code into the telephone as the home area code. When you receive
a call from within your home area code, the caller ID history only displays the
seven digits of the telephone number.
This feature makes it easy for you to place a call from the caller ID log. If you
dial ten digits to make a local phone call, do not use this home area code
feature. If you do, you cannot place local calls from your caller ID log, as they
will have only seven digits.
To set the home area code:
1. Press the MENU soft key when the handset is not in use.
2. Press
or p
q
CID
SELECT soft key.
3. Press
or p
q
CID
press the SELECT soft key.
4. Use the dialing keys (0-9) to enter a three-digit home
area code. Press CANCEL to delete a digit.
5. Press the SET soft key to save or press the BACK soft
key to exit to the previous menu.
NOTE: If, in the future, your telephone service provider requires you to dial the area code
when making a local call, or, if you move to a location that requires it, delete the home
area code you have already programmed following the steps mentioned above. After you
have deleted the home area code, _ _ _ appears in the display.
to scroll to Settings, then press the
DIR
to scroll to Home area code, then
DIR
22
Key tone
Set date/time
Home area code
SELECT
HOME AREA CODE
___
BACK
SET
Advertisement
Table of Contents
