Table of Contents
Advertisement
A. Vent Components Diagrams (continued)
DECORATIVE TERMINATIONS/SHROUDS
Only use listed decorative termination caps/shrouds with Hearth & Home Technologies approved venting systems.
This applies to both DVP and SLP venting systems.
Decorative Terminations Caps/Shrouds
DTO134
DTO146
DTS134
DTS146
LDS33
LDS46
LDS-BV
TOP VIEW
13-11/16 IN.
SIDE VIEW
Note: A wire harness is required to power the PVV-SLP and connect it to the appliance. It is ordered separately from
the PVV-SLP. Contact your dealer to order.
Note: The PVV-SLEEVE-12 and/or PVV-SLEEVE-48 is required to be installed with the PVV-SLP. It is ordered
separately from the PVV-SLP. Contact your dealer to order.
Note: The PVV-SLP requires one of the following options to be installed on this appliance.
Option A: IFT-RC400 and/or IFT-WFM, IFT-ACM and IntelliFire App that can be downloaded from the app store.
OR
Option B: IFT-RC150, IFT-ACM, IFT-WFM and an IntelliFire App that can be downloaded from the app store. These
accessories are purchased separately from the PVI-SLP-B. Contact your dealer to order.
Note: The PVV-SLP requires one of the following options to be installed on this appliance.
Option A: IFT-RC400
Option B: IFT-RC150 and IFT-ACM.
These accessories are purchased separately from the PVV-SLP. Contact your dealer to order.
Figure 12.7 PVV-SLP Vent Components
1-3/4 IN.
4 IN.
13-5/8 IN.
3-11/16 IN.
5-7/8 IN.
12-1/8 IN.
OR
Heat & Glo • 6000C-IFT, 8000C-IFT Installation Manual • 2502-980 Rev. M • 3/21
Required Wire Harness and PVV-SLEEVE
Lengths Available
10 ft. PV Wire Harness
20 ft. PV Wire Harness
40 ft. PV Wire Harness
60 ft. PV Wire Harness
80 ft. PV Wire Harness
100 ft. PV Wire Harness
Description
12 in. Wire Harness Sleeve
48 in. Wire Harness Sleeve
PVV-SLP
Vertical Power Vent
Part Number
PVI-WH10
PVI-WH20
PVI-WH40
PVI-WH60
PVI-WH80
PVI-WH100
Part Number
PVV-SLEEVE-12
PVV-SLEEVE-48
71
Advertisement
Table of Contents
