Battery; Pneumatic Tires - Greenlee GPU 18-8 Operation, Service And Parts Instruction Manual

GPU 18-8 Hydraulic Power Unit
Maintenance (cont'd)

Battery

Stop engine when checking battery
electrolyte level. Do not check or fill
battery electrolyte level near an open
flame, sparks, or when smoking.
Battery fumes are flammable and
explosive, and if ignited will result in
severe injury or death.
When working on or around the battery:
• Remove jewelry, wristwatches and any other
conductive items. The current produced by the
battery can cause severe burns.
• Wear eye protection and gloves and handle the
battery carefully. Contact with battery acid can
cause severe burns or blindness.
Failure to observe these warnings could result in
severe injury or death.
Battery Maintenance and Replacement
Battery is a utility style, lead acid type. Check battery
electrolyte level at least once a month. Stop power unit
engine when checking battery electrolyte level. If
electrolyte level is low, fill to required level using distilled
water only. Clean battery terminals and cable clamps
when required. After cleaning, coat battery terminals and
cable clamps with grease or other suitable product to
reduce corrosion. When battery replacement becomes
necessary, it is recommended that replacement battery
should meet or exceed original battery specifications;
amps, cranking power, etc.

Pneumatic Tires

Inflate power unit tires to the recommended pressure
printed on the sidewalls of the tires. Do not exceed tire
manufacturer's recommended maximum pressure
printed on the sidewalls of the tires or rim
manufacturer's recommended maximum pressure
stamped on the rim, whichever is lower.
12