Safety Information; Packing List - Greenlee 93-70 Operating, Maintenance And Safety Instructions

SAFETY INFORMATION

Follow operating instructions carefully.
Contact with live circuits can cause serious injury or death.
DANGER
Do not use meter if wet or damaged.
To avoid electric shock, do not perform any service or maintenance other
than that described in these instructions. Always disconnect test leads
HIGH
before opening case.
VOLTAGE
To avoid personal injury and possible damage to the meter, never connect
a source of voltage with the rotary function switch in
To avoid electric shock, hazard or damage to meter do not apply voltage
exceeding the over voltage rating of the function between any terminals of
the instrument.
Failure to observe these warnings may result in serious injury or death!
CAUTION
• Observe proper safety precautions when working with voltages above 50V DC or 25V AC
RMS. These voltage levels pose a shock hazard to the user.
• If the meter is used near equipment that generates electro-magnetic interference the
display may be unstable or indicate incorrect measurement values.
• Use only the correct, properly rated fuses, when replacement is necessary.
• Disconnect test leads from items being tested before changing rotary function selector.
• Do not store instrument in hot, 135 F (57 C) and above, or humid areas.
• Replace weak or discharged battery as soon as it is detected (see Maintenance
information).
• Use only for specified use and capacities.
Failure to observe these warnings may result in minor injury and/or

PACKING LIST

The following items should be packed with the multimeter unit:
Item #
1
2
3
4
2
damage to the instrument!
Part #
500 0409.3
500 0842.0
999 1961.3
500 0841.2
Qty.
2 Test Leads - 1 Black, 1 Red
3 RST Leads, 1 ea. - Black, Red, Yellow
1 IM-1245, Instruction Manual
1 Protective Holster
(ohms) position.
Description