Supermicro X10DRFR User Manual page 90

X10DRFR/X10DRFR-N/X10DRFR-NT Motherboard User's Manual
the receiving buffer is full. Send a "Start" signal to start data-sending when the
receiving buffer is empty. The options are None and Hardware RTS/CTS.
VT-UTF8 Combo Key Support
Select Enabled to enable VT-UTF8 Combination Key support for ANSI/VT100
terminals. The options are Enabled and Disabled.
Recorder Mode
Select Enabled to capture the data displayed on a terminal and send it as text
messages to a remote server. The options are Disabled and Enabled.
Resolution 100x31
Select Enabled for extended-terminal resolution support. The options are Dis-
abled and Enabled.
Legacy OS Redirection Resolution
Use this item to select the number of rows and columns used in Console Redi-
rection for legacy OS support. The options are 80x24 and 80x25.
Putty KeyPad
Use this item to configure the settings for the function keys and the key pad for
Putty, which is a terminal emulator designed for the Windows OS. The options
are VT100, LINUX, XTERMR6, SCO, ESCN, and VT400.
Redirection After BIOS Post
Use this item to enable or disable legacy Console Redirection after BIOS POST
(Power-On Self-Test). When this feature is set to Bootloader, legacy Console
Redirection is disabled before booting the OS. When this feature is set to Always
Enable, legacy Console Redirection remains enabled upon OS boot. The options
are Always Enable and Bootloader.
Legacy Console Redirection Settings
This feature specifies how the host computer exchanges data with the client com-
puter via Legacy Console Redirection.
Legacy Serial Redirection Port
The feature selects a serial port in a client server to be used by Legacy Console
Redirection to communicate with a remote host server. The options are COM1
and COM2/SOL.
4-28