Supermicro X10DRFR User Manual page 3

This manual is written for system integrators, IT professionals, and
knowledgeable end-users. It provides information for the installation and use of the
X10DRFR/X10DRFR-N//X10DRFR-NT motherboard.
About This Motherboard
The Super X10DRFR/X10DRFR-N/X10DRFR-NT motherboard supports dual Intel
E5-2600 (v3/v4) processors (Socket R3) that offer new Intel Microarchitecture 22nm
(E5-2600v3)/14nm (E5-2600v4) Process Technology, delivering the best balanced
solution of performance, power efficiency, and features to meet demands of high-end
server platforms. With the PCH C612 built in, the X10DRFR(-N/-NT) motherboard
supports Intel® Manageability Engine, Intel Rapid Storage Technology enterprise,
Digital Media Interface, PCI-E Gen. 3.0, and 2400 MHz (max) DDR4 memory. This
motherboard is ideal for 4U FatTwin server platforms. Please refer to our website
(http://www.supermicro.com) for processor and memory support updates.
Manual Organization
Chapter 1 describes the features, specifications and performance of the moth-
erboard. It also provides detailed information about the Intel PCH C612 chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules, and other hardware components into the
system. If you encounter any problems, see Chapter 3, which describes trouble-
shooting procedures for video, memory, and system setup stored in the CMOS.
Chapter 4 includes an introduction to BIOS, and provides detailed information on
running the BIOS Setup utility.
Appendix A provides BIOS Error Beep Codes.
Appendix B lists software installation instructions.
Appendix C contains UEFI BIOS Recovery instructions.
Preface
iii
Preface
®