Maintenance Log - Buderus Logano G234X-64 Installation And Service Instructions Manual

9.8

Maintenance log

▶ Check off preventive maintenance performed.
▶ Record measured values.
▶ Heed the information on the indicated pages
Maintenance work
1. Check the flue system, including combustion air supply, air inlet and ventilation
openings
2. Gas manifold pressure
3. Inspect the burner
4. Clean the boiler
5. Clean the burner
6. Measure the gas supply pressure
7. Measure the orifice pressure
8. Check for leaks during operation
9. Check the pilot burner flame
10. Check the main burner flame
11. Check the vent damper
12. Check high-temperature limit controller
13. Check the area around the boiler for flammable materials, gasoline or corrosive
liquids.
14. Confirm maintenance
Confirmation of proper maintenance
(company stamp, signature)
Table 14 Maintenance log
Date Date
______________ inches W. C. ______________ inches W. C.
______________ inches W. C. ______________ inches W. C.
Table 15 Maintenance log
Logano G234X – 6 720 811 233 (2017/02)
Page
Page 14
Page 20
Page 25
Page 26
Page 27
Page 18
Page 18
Page 18
Page 20
Page 21
Page 17
Page 22
Page 3
Date Date
______________ inches W. C. ______________ inches W. C.
______________ inches W. C. ______________ inches W. C.
Boiler inspection and maintenance
Date Date
____________inches W. C. ___________ inches W. C.
___________ inches W. C. ___________ inches W. C.
Date
______________ inches W. C.
______________ inches W. C.
9
31