Bluetooth Operation - Jensen AWM968BK Installation And Operation Manual

AWM968

BLUETOOTH OPERATION

1
2
3
4
5 AWM968
6
7
8
9
10
25
26
27
30
28 31
The AWM968 includes built-in Bluetooth technology that allows you to connect this head unit to
Bluetooth devices for streaming audio playback.
About Bluetooth Technology
Bluetooth is a short-range wireless radio connectivity technology developed as a cable
replacement for various electronic devices. Bluetooth operates in 2.4 GHz frequency range
and transmits voice and data at speeds up to 1 megabit per second. Bluetooth was launched
by a special interest group (SIG) comprised of Ericsson Inc., Intel Corp., Nokia Corp., Toshiba
and IBM in 1998, and it is currently developed by nearly 2,000 companies worldwide. The
Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such
marks is under license. Other trademarks and trade names are those of their respective
owners.
PUSH/ENTER
22 23 24
PUSH/ENTER
29 32
Bluetooth Menu Options
1. Press the button (5) to enter Bluetoooth mode.
11
2. Press the button again to display the current paired device.
12
3. Rotate the VOL/PUSH/ENTER button to view paired BT devices and press to select.
13
4. Once a device is selected, rotate the VOL/PUSH/ENTER button to choose one of the
following options: connect/disconnect, lock/unlock or delete (delete displays only if the
14
device is not connected).
15
• LOCK/UNLOCK: The AWM968 can store up to 5 devices for BT connection. The
16 devices are stored in FIFO (First In First Out) order. To prevent a device from being
bumped from the list when more than 5 devices are used, you must lock the device.
17
To Lock/Unlock a device, press the VOL/PUSH/ENTER button.
18
• DISCONNECT: To disconnect a paired device, press the VOL/PUSH/ENTER button
to temporarily remove the BT link. The link can be re-established through your phone
menu by selecting the AWM968 for connection.
19
• DELETE: To delete a device from the list, press the VOL/PUSH/ENTER button.
5. Press the VOL/PUSH/ENTER button to enter.
20
Pairing a Bluetooth Device
21
Before you begin, consult the owner's manual for the Bluetooth device you want to pair.
1. Make sure the device you want to pair is on and ready to receive a signal from the
AWM968. To begin pairing, press and hold the
attempt to pair to available devices. When pairing with a smart phone/iPhone, the
AWM968 becomes "discoverable" by your smart phone and can be paired using the
phone menu.
2. When the Bluetooth device has completed it's search, the mobile phone will display the
Bluetooth device name (AWM968).
3. Select AWM968.
4. Enter the pairing password (0000), if requested.
5. If successful, the unit will display "PAIR OK".
After connecting successfully, you are able to listen to music stored on your Bluetooth enabled
device through the radio.
Answering a Call
When answering a call using the connected phone, BT AUDIO will pause. After hanging up
from the call, BT AUDIO to continue on some phones. It may be necessary to press the play
button to resume BT AUDIO.
BT Audio (A2DP)
The A2DP music is available for Bluetooth enabled phones when the phone is connected. To
access Bluetooth mode and play songs stored on your phone, press the
BT mode , the "BT AUDIO" is displayed on the LCD.
Selecting Tracks
During playback, press the TUNE/SEEK/TRACK >>| or |<< button (13, 14) to play the previous
or next track. You can also use the 1|<< and 3>>| buttons (27, 29) to select tracks.
13
button (5). The unit will automatically
button (5). While in